User Guide

4-2
ValveLinkt Software
Note
To successfully use the ValveLink DTM, you must be
familiar with using the FDT frame application used to
launch the ValveLink DTM. The information found in
this section covers one example. Refer to the users
guide for the FDT frame application that the ValveLink
DTM is installed with for additional information.
Step 1: Start the FDT frame application.
Step 2: Select Add Device, as shown in figure 4-1, and click on the appropriate CommDTM. Select OK.
Add Device
Figure 4-1. Select Add Device to Add the CommDTM