User Guide

6-3
ValveLinkt Software
Calibration Button—Opens the Auto Travel Calibration window for the open tag.
Available only on software with calibration enabled. See the ValveLink software Help
screen, About ValveLink, to see if calibration is enabled.
Instrument Status Button—Displays the Instrument Status window for the open
tag. Provides device monitor, alert, and device information for an open tag.
Step Response Button—Opens the Step Response window for the open tag. Plots
TRAVEL versus the TIME it takes to move the valve through the specified steps.
Available only on software with step response enabled. See the ValveLink software
Help screen, About ValveLink, to see if step response is enabled.
Dynamic Scan Button—For HART and fieldbus instruments, sets variables for
running diagnostic tests, including input start and input end percentages and Scan
time.
Batch Runner Button—Opens the Batch Runner dialog box to permit defining a
batch process. With Batch Runner you can automate a user-selected group of
operations to run on one or more instruments. Available only on software with batch
runner enabled. See the ValveLink software help screen, About ValveLink, to see if
Batch Runner is enabled.