Data Sheet

Z500 Ball Valves
D103992X012
Product Bulletin
51.3:Z500
April 2015 - rev B
2
Specifications
Valve Sizes
Z500: NPS
J 1/2, J 3/4, J 1, J 1-1/2, J 2, J 3,
J 4, J 6, J 8, J 10, J 12, J 14, J 16, J 18, J 20,
J 24, J 26, J 28, J 30 and, J 36
Maximum Working Pressures
(1)
Forged Steel Valves: Consistent with applicable
pressure-temperature ratings in table 1 per ASME
B16.34, but do not exceed the material temperature
capabilities shown below
Shutoff Classification
(1)
Z500: Valves are tested to API 598 in the preferred
flow direction.
Class V type B per FCI 70-2 in reverse flow in
bi-directional design (Must be specified). For other
shutoff requirements, please contact your Emerson
Process Management sales office.
Construction Materials
See table 2
Temperature Capabilities
(1)
Welded and Threaded Ends: SA105 - 800_F, F22
1000_F, F91 1200_F, F316 1400_F
Flanged End Connections: SA105 - 600_F, F22 800_F,
F91 1000_F, F316 1000_F
Packing Constructions
Carbon Steel Valve Bodies: Wire reinforced graphite
stem packing, AISI 4130 nitrided packing gland
Stainless Steel: Wire reinforced graphite stem
packing, 316 SST nitrided packing gland
Dimensions
Contact your Emerson Process Management sales
office
Standard Flow Direction
Preferred Flow Direction: Preferred flow for optimal
sealing is forward into the integral seat
Flow Coefficients
Contact your Emerson Process Management sales
office
Maximum Ball Rotation
90 degrees
Actuator Mounting
The preferred mounting orientation is vertical. Other
orientations are acceptable
Approximate Weight
Contact your Emerson Process Management sales
office
Options
J Reduced port, J Double reduced ports,
J Expanded outlet, J Scraper seats, J HVOF
coating options,
J Bi-directional sealing, J High
cycle constructions,
J Lockouts, J Spray and fused
coatings
1. The pressure/temperature limits in this bulletin, and any applicable code or standard limitation, should not be exceeded.
Features (continued)
n Bi-Directional Sealing - Optional bi-directional
sealing is available for all configurations but must be
specified when ordering. Selecting this option
designates reverse flow sealing to ANSI/FCI 70-2
Class V Type B shutoff classification.
n Sour Service Capability - Materials are available for
applications involving sour liquids and gases. These
constructions comply with NACE MR0103.
n Back Pressure Protection - Welded and threaded
end connection valves with 0.65, 1.15, and 1.5 inch
bores come standard with a seat holder designed to
protect the Belleville spring from being deformed in
case of process back pressure.