Data Sheet

Vee-Ball Valves
D101363X012
Product Bulletin
51.3:Vee-Ball
January 2015
2
Specifications
Valve Sizes and End Connection Styles
V150: NPS
J 1, J 1-1/2, J 2, J 3, J 4, J 6, J 8,
J 10, J 12, flanged valves that mate with CL150
raised-face flanges (see table 1). Also, NPS 3 through
12 mate with PN classes (see table 1)
V150: NPS
J 14, J 16 and J 20: Flanged raised-face
valves. NPS 14 and 16 valves are available in ASME
B16.10 Short, face-to-face dimensions only (see table
1 and figure 8)
V200: NPS
J 1, J 1-1/2, J 2, J 3, J 4, J 6, J 8, or
J 10 flangeless valves that mate with J CL150,
J 300, or J 600 raised-face flanges depending on
size (see table 1)
V300: NPS
J 1, J 1-1/2, J 2, J 3, J 4, J 6, J 8,
J 10, J 12, J 14, and J 16 valves mate with CL300
raised-face flanges. Also some sizes mate with PN
classes (see table 1)
Maximum Inlet Pressures
(1)
V150 or V300 Steel, CF3M (316L Stainless Steel) or
CG8M (317 Stainless Steel) Valves: Consistent with
CL150 for V150, or CL300 for V300,
pressure-temperature ratings per ASME B16.34 or
with PN pressure-temperature ratings shown in table
1 but do not exceed the material temperature
capabilities shown below or the pressure drop
limitations. CF3M is available in all areas and is the
standard material offering in Europe.
V200 Steel and CG8M (317 Stainless Steel) Valves:
Consistent with applicable pressure-temperature
ratings in table 1 per ASME B16.34, but do not exceed
the material temperature capabilities shown below
and the pressure drop limitations.
CW2M Valves: Consistent with applicable
pressure-temperature ratings shown in table 5, but
do not exceed the material temperature capabilities
shown below and the pressure drop limitations.
Maximum Shutoff Pressure/Temperature Ratings
(1)
Composition (Fisher TCM Plus or TCM Ultra), Flat
Metal (NPS 3 through 12 valves only), HD and High
Temperature HD Metal Ball Seals and Flow Ring: See
table 7.
Shutoff Classification
(1)
Fisher TCM Plus or Ultra Ball Seal (Forward Flow):
Class VI per ANSI/FCI 70-2 and per IEC 60534-4,
Flat Metal Ball Seal for NPS 3 through 12 valves only
(Forward Flow): Class IV per ANSI/FCI 70-2 and per IEC
60534-4,
HD (Heavy Duty) Metal Ball Seal (Bidirectional Flow):
0.01% of valve capacity; Class IV per ANSI/FCI 70-2
and IEC 60534-4; Maximum allowable pressure drop
in reverse flow is 6.9 bar (100 psi);
High Temperature HD (Heavy Duty) Metal Seal
(Bidirectional Flow): Class III per ANSI/FCI 70-2 and IEC
60534-4
Flow Ring Construction (Bidirectional Flow): 5% of
valve capacity at full travel
Micro-Notch Ball: Same leakage as standard ball
Construction Materials
See tables 3 and 4
Temperature Capabilities
(1,2)
Composition Seals
Fisher TCM Plus: -46 to 232_C (-50 to 450_F)
Fisher TCM Ultra: -46 to 260_C (-50 to 500_F)
HD Metal Seals: -46 to 288_C (-50 to 550_F)
High Temperature HD Metal Seal: 288 to 427_C (550
to 800_F). Contact your Emerson Process
Management sales office if higher temperatures are
required.
Ceramic Micro-Notch Ball: -46 to 93_C (-50 to
200_F)
(4)
Flow Ring or Flat Metal Seal : -198 to 425_C (-325 to
800_F)
PEEK/PTFE Bearings: -198 to 260_C (-325 to 500_F)
Packing Constructions
PTFE V-ring: -46 to 232_C (-50 to 450_F)
Graphite: -198 to 538_C (-325 to 1000_F)
ENVIRO-SEALt Single PTFE V-ring: -46 to 232_C (-50
to 450_F)
ENVIRO-SEAL Graphite: -7 to 316_C (20 to 600_F)
Flow Characteristic
Modified equal percentage
Dimensions
See figures 5, 6, and 7 for dimensions
Optional Face-to-Face Dimensions
J ASME B16.10 short face-to-face dimensions are
available as an option for NPS 1 through 12 valves.
Note that ASME B16.10 short dimensions are actually
longer than ISA S75.08.02. See figure 8 for
dimensions.
(continued)