Manualshelf

Instruction Manual

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher Vee-Ball V200
11121314151617181920
Instruction Manual
D103803X012
Z500 Valve
April 2015 - rev B
15
Figure 10. Place the Actuator on Top of the Mounting Bracket
Figure 11. Install the Handwheel
Hand Lever
6. Position the mounting bracket onto the body. Use anti-seize lubricant on the bracket studs and nuts. Make sure the
markings on the studs and nuts are facing out. Leave the nuts finger tight.
7. Insert the support bushing into the allotted slot of the mounting bracket.
8. Mount the stem adapter on top of the stem with the two keys. Make sure it fits onto the stem easily without
hammering. Make sure the mark is facing the lapped side of the ball/end adapter.