Owner`s manual

If hazard indicator and horn mode is not
necessary, you can switch to hazard indi-
cator only mode by following the switching
procedure.
In hazard indicator only mode, when the
LOCK button
j
1
is pushed, the hazard indi-
cator flashes twice. When the UNLOCK but-
ton
j
2
is pushed, neither the hazard indi-
cator nor the horn operates.
(Switching procedure)
Push the LOCK
j
1
and UNLOCK
j
2
buttons
on the keyfob simultaneously for more
than 2 seconds to switch from one mode to
the other.
When pushing the buttons to set hazard in-
dicator only mode, the hazard indicator
flashes 3 times.
When pushing the buttons to set hazard in-
dicator and horn mode, the hazard indi-
cator flashes once and the horn chirps
once.
The hazard indicator and horn mode also
can be changed with vehicle electronic sys-
tems on the monitor. See “4. Display
screen, heater, air conditioner and audio
systems”.
Locking doors and fuel-filler door
1. Remove the ignition key.*1,*2
2. Close all the doors.*3
3. Push the LOCK button
j
1
on the keyfob.
4. All the doors and fuel-filler door will
lock.
All of the doors will lock when the LOCK
button
j
1
on the keyfob is pushed even
though a door remains open and/or the ig-
nition key is in the ON position.
5. The hazard indicator flashes twice and
the horn chirps once.
O When the LOCK button
j
1
is pushed
with all doors locked, the hazard indi-
cator flashes twice and the horn chirps
once as a reminder that the doors are
already locked.
*1: Doors lock with the keyfob while a key
is in the ignition switch. However, the
panic alarm will not activate when the
key is in the ignition switch.
SPA1260
Pre-driving checks and adjustments 3-7
Z 05.11.1/S50-D/V5.0 X