User`s guide

Administrator’s Guide for Polycom HDX Systems
6 - 10
To configure the LDAP settings:
1. Go to System > Admin Settings > Global Services > Directory Servers >
Edit.
2. Configure these settings on the LDAP screen.
Group Name Specifies the group name used for Polycom GDS directory
entries in the local directory. The default name for the Polycom
GDS group is Polycom GDS.
Setting Description
LDAP Setting Description
Server Address Specifies the address of the LDAP directory server. With
Automatic Provisioning, this setting is configured by the server
and appears as read-only.
Server Port Specifies the port used to connect to the LDAP server. With
Automatic Provisioning, this setting is configured by the server
and appears as read-only.
Group Name Specifies the group name used for LDAP directory entries in
the local directory. The default name for the LDAP group is
Polycom Directory.
Base DN
(Distinguished
Name)
Specifies the top level of the LDAP directory where searches
will initiate. With Automatic Provisioning, this setting is
configured by the server and appears as read-only.
Authentication
Type
Specifies the protocol used for authentication with the LDAP
server: NTLM, BASIC, or Anonymous.
Use SSL
(Secure Socket
Layer)
Enables SSL for securing data flow to and from the LDAP
server.
Domain Name Specifies the domain name for authentication with the LDAP
server.
User Name Specifies the user name for authentication with LDAP server.
Password Specifies the password for authentication with the LDAP
server.