User`s guide

Administrator’s Guide for Polycom HDX Systems
7 - 4
To design the home screen:
1. Go to System > Admin Settings > General Settings > Home Screen
Settings.
2. Configure these settings on the Home Screen Settings screen:
Setting Description
Dialing Display Specifies which dialing option to display:
• Dialing entry field — Allows users to enter numbers
manually.
• Display marquee — Displays text in the dialing entry field.
Can be used to display user instructions. Users cannot
enter numbers manually when this option is selected.
•None — Removes the dialing entry field from the screen.
Enter Marquee
Text
Specifies the text to display when the Dialing Display is set to
Display marquee.
Contact List as
Home Screen
Specifies whether to display the contact list home screen.
Call Quality Allows users to select the bandwidth for calls, as well as the
call type, from the Place a Call screen. For information about
enabling call types, refer to Configuring Call Preferences on
page 2-29.
H.323 Extension
(E.164)
Allows users to enter H.323 extensions separately from the
gateway ID on the Place a Call screen. If your system is
registered with a gatekeeper, this setting also displays your
H.323 extension on the home screen.
If you do not select this setting, users make gateway calls by
entering the call information in this format:
gateway ID + ## + extension
Directory Allows users to access the directory.
System Allows users to access the System screen, which includes
User Settings, Diagnostics, and System Information. If you
remove the System button, you can still access the System
screen by navigating to the home screen, pressing on the
remote, and selecting System.
Multipoint Allows users to access the multipoint dialing screen via a
Multipoint button on the home screen.