User`s guide

Administrator’s Guide for Polycom HDX Systems
1 - 8
The indicator light on the front of the Polycom HDX 8000 series and Polycom
HDX 7000 series system provides this information:
Powering On the Polycom HDX 4000 Series Systems
To power on the Polycom HDX 4000 series, do one of the following:
• Press the power button on the front of the system.
• Press the power button on the side of the monitor.
The system powers on and displays near video or your computer desktop
within about 60 seconds.
To power off the Polycom HDX 4000 series monitor:
¾ Press the power button on the side of the monitor.
The monitor enters standby mode. The system stays powered on.
To power off the Polycom HDX 4000 series, do one of the following:
• Press and hold the power button on the side of the monitor.
The monitor and the system power off.
• Press and hold the power button on the front of the system.
The monitor and the system power off.
Indicator Light System Status
Off System is without power.
Steady blue light System is initializing.
System is awake and not in a call.
Blinking blue light System received an IR signal while
awake.
Blinking blue light (on 1 sec, off 2 sec) System is asleep, not in a call.
Steady amber light System is in a call.
Blinking amber light System received an IR signal while in
a call.
Alternating blue and amber lights System is in software update mode.
System is in factory restore mode.