User`s guide

Networks
2 - 27
6. Select and configure these settings:
Connecting to an Analog Phone Line
You can connect an analog phone line to a Polycom HDX 9000 series, Polycom
HDX 8000 series, or Polycom HDX 4000 series system to make regular
telephone calls with the system or to add audio-only participants to video
calls.
A connected SoundStation® IP 7000 conference phone can use this analog
phone line to make regular telephone calls when the Polycom HDX system is
configured as described in Configuring Telephony on page 2-28.
Pulse Width
(millisec)
Specifies whether the system should set the pulse
duration automatically or use the number of milliseconds
you enter.
Setting Description
Setting Description
Enable Broadcast
Mode
Enables support for H.331 broadcast transmissions
from the Polycom HDX system.
Broadcast mode enables the system to send video
and audio to many other systems, such as large
satellite networks.
Enable People+Content Enables People+Content for broadcast mode.
Note: Polycom HDX systems must have the
People+Content option installed to enable this setting.
Video Format Specifies the resolution at which video is transmitted.
Video Protocol Specifies the protocol used to transmit video. Choose
the lowest protocol supported by all systems in the
conference.
Audio Protocol Specifies the protocol used to transmit audio.
Frame Rate Specifies the frame rate to use.
The country setting must be configured correctly on the Polycom HDX system to
ensure proper operation of the phone line and to comply with local telephony
regulations.