Home Audio System Owner's Manual

Connecting and Playing A 1G (First Generation) iPod

Shuffle

The docking station of this system includes an Apple USB connector specifically

designed for the 1G (First Generation) iPod

Shuffle with direct USB connector.

NOTE: If you have a new 2G (Second Generation) iPod

Shuffle you may

connect it to the Auxiliary Input jack of this system. Please refer to the

connection instructions on page 39.

IMPORTANT!

• Do not attempt to connect other portable MP3 players or portable USB

drives to this iPod

Shuffle USB connector. You can connect MP3 players

to the Auxiliary Input (Aux) jack of this system but not to the USB connector.

This system is not compatible with portable USB storage drives that contain

compressed MP3 or WMA audio files.

• The iPod

Shuffle has no interface to receive commands from an external

controller, therefore you cannot use the iPod Play/Pause button, the

TUN + or TUN – buttons on the top panel, or the remote control of this

system to operate the iPod

Shuffle. You can only use the controls on the

iPod

Shuffle itself.

1.) Set the function switch on your iPod

Shuffle to either the Normal or Shuffle

playback position and remove the protective cap.

2.) Connect your iPod

Shuffle to the USB connector on the docking station. It can

only be connected one way, with the front panel of the Shuffle facing outward.

3.) Press the Power button on this system to turn the power ‘On’.

Original iPod

Shuffle

(First Generation)

iE600_050407.p65 4/5/2007, 11:5037