Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Dimensions for NPS 2 CL150 through 1500 Slip‐On Flange Connections Supplement to Fisherr L2, L2e, and L2sj Level Controller Instruction Manuals This supplement contains dimensions for NPS 2 CL150 through 1500 slip‐on flange connections for L2, L2e, and L2sj level controllers.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Flange Orientation Orient the controller so that the case is level. See figure 1 for the proper sensor orientation for flange welding. WARNING To maintain code/standard compliance, weld fabrication must meet the requirements of AS ME Section IX. Failure to meet these requirement could result in personal injury and/or property damage.
Instruction Manual Supplement D103405X012 L2, L2e, and L2sj Controller April 2013 Related Documents D Bulletin 34.2:L2—Fisher L2 Liquid Level Controller (D103034X012) D Fisher L2 Liquid Level Controller Instruction Manual (D103032X012) D Bulletin 34.2:L2e—Fisher L2 Electric Level Controller (D103532X012) D Fisher L2e Electric Level Controller Instruction Manual (D103531X012) D Bulletin 34.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Figure 2. Fisher L2 Liquid Level Controller—Dimensions with Slip‐On Flange (Refer to Table 1 for Dimensions A, B, and F) 1/4‐18 NPT OUTPUT CONN D 1 2 3 248 (9.75) B A 155 (6.12) 1 2 302 (11.88) F 2 48 (1.88) j 191 (7.50) 2 2 302 (11.88) 318 (12.50) ANSI FLANGE 14B8855‐A j 48 1/4‐18 NPT SUPPLY CONN 105 (4.12) FLANGED CONNECTION (1.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Table 1. Fisher L2 Liquid Level Controller—Dimension A, B, and F (see figure 2) SIZE AND RATING DIMENSIONS A, B, AND F A B F A mm 2 3x2 4x2 6x2 NPS 2 slip-on Connection B F Inches CL150 RF 326 202 277 12.85 7.96 10.90 CL300 RF 326 202 277 12.85 7.96 10.90 CL600 RF 320 209 270 12.58 8.23 10.63 CL600 RTJ 318 211 268 12.52 8.29 10.57 CL900/1500 RF 299 230 249 11.77 9.04 9.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Figure 3. Fisher L2e Electric Level Controller—Dimensions with Slip‐On Flange (Refer to Table 2 for Dimensions A, B, and F) 1 2 3 216 (8.51) 1 302 (11.88) j 2 1 2 48 (1.88) 149 (5.87) 303 2 (11.92) 302 2 (11.88) 88 (3.46) GG13010-A j 48 142 (5.60) FLANGED CONNECTION (1.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Table 2. Fisher L2e Electric Level Controller—Dimension A, B, and F (see figure 3) SIZE AND RATING DIMENSIONS A, B, AND F A B F A mm 2 3x2 4x2 6x2 NPS 2 slip-on Connection B F Inches CL150 RF 326 200 277 12.85 7.86 10.90 CL300 RF 326 200 277 12.85 7.86 10.90 CL600 RF 320 207 270 12.58 8.13 10.63 CL600 RTJ 318 208 268 12.52 8.19 10.57 CL900/1500 RF 299 227 249 11.77 8.94 9.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Figure 4. Fisher L2sj Liquid Level Controller—Dimensions with Slip‐On Flange (Refer to Table 3 for Dimensions A, B, and F) 1/4‐18 NPT OUTPUT CONN D 1 2 3 248 (9.75) B A 155 (6.12) 1 2 152.4 (6.00) F 2 76.2 (3.00) 2 191 (7.50) 172.1 (6.78) 2 152.4 (6.00) ANSI FLANGE 1/4‐18 NPT SUPPLY CONN 105 (4.12) 76.2 (3.
Instruction Manual Supplement L2, L2e, and L2sj Controller D103405X012 April 2013 Table 3. Fisher L2sj Liquid Level Controller—Dimension A, B, and F (see figure 4) SIZE AND RATING DIMENSIONS A, B, AND F A B F A mm 2 3x2 4x2 6x2 NPS 2 slip-on Connection B F Inches CL150 RF 250 202 201 9.85 7.96 7.90 CL300 RF 250 202 201 9.85 7.96 7.90 CL600 RF 243 209 194 9.58 8.23 7.63 CL600 RTJ 242 211 192 9.52 8.29 7.57 CL900/1500 RF 223 230 173 8.77 9.04 6.
L2, L2e, and L2sj Controller April 2013 Instruction Manual Supplement D103405X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher is a mark owned by one of the companies in the Emerson Process Management business division of Emerson Electric Co.