User manual

ManualsBrandsEmerson ManualsConsumer electronicsLiebert DS

131

132

133

134

135

136

137

138

139

140

Piping Schematics

123 Liebert

™

Figure 95 Primary connection locations—upflow, water/glycol/GLYCOOL, 53-77kW (15-22 ton), all

compressor *** models

Point Description

inches (mm)

Connection Size / Opening

inches (mm)

W1 Water/Glycol/GLYCOOL Access (Bottom) 102-15/16 (2615) 9 (229) 3-1/2 x 8 (89 x 203)

W2 Water/Glycol/GLYCOOL Access (Top) 102-15/16 (2615) 9 (229) 3-1/2 x 8 (89 x 203)

W3 Water/Glycol/GLYCOOL Access (Side) - - 6 x 17-3/16 (152 x 437)

WS Water/Glycol/GLYCOOL Supply - - 2-1/8 Cu Sweat

Water/Glycol/GLYCOOL Return - - 2-1/8 Cu Sweat

CGD* Condensate Gravity Drain - - 3/4 FPT

CPD Condensate Pump Discharge (Option) 79-5/16 (2015) 11-7/8 (302) 1/2 Cu Sweat

HUM Humidifier Supply Line 79-5/16 (2015) 9-7/8 (251) 1/4 Cu Sweat

ECS** Econ-O-Coil Supply 78-5/8 (1998) 7-7/8 (200) 2-1/8 Cu Sweat

ECR** Econ-O-Coil Return 78-5/8 (1998) 4-5/8 (117) 2-1/8 Cu Sweat

E1 Electrical Connection (High Voltage) 75-3/8 (1915) 30 (762) 2-1/2

E2 Electrical Connection (High Voltage) 69-7/8 (1775) 30 (762) 2-1/2

LV1 Electrical Connection (Low Voltage) 19-1/2 (495) 29-1/16 (738) 7/8

LV2 Electrical Connection (Low Voltage) 19-1/2 (495) 30-1/2 (775) 7/8

LV3 Electrical Connection (Low Voltage) 19-1/2 (495) 31-15/16 (811) 7/8

* Field-pitch condensate drain line a minimum of 1/8" (3.2 mm) per foot (305 mm). All units contain a factory-installed condensate trap. Do

not trap external to the unit. Drain line may contain boiling water. Select appropriate drain system materials. The drain line must comply

with all local codes.

** Supplied on Dual-Cool systems only (four-pipe system)

*** Digital scroll compressor not available on 077 models.

Source: DPN001214, Rev. 1

NOTES:

1. Drawing not to scale.

2. Tolerance on all piping dimensions

is ± 1/2" (13mm).

3. Field routed alternatives for water/glycol

connections.

4. See submittal page DPN001191 for

blower outlet and deck dimensional data.

(152mm)

DPN001214

Rev. 1

LEFT SIDE SECTION VIEW OF UNIT

FRONT SECTION VIEW OF UNIT

(Left Front Panel Not Shown)

14-1/4"

(362mm)

15-7/8"

(403mm)

3-7/8"

(98mm)

17-3/16"

(437mm)

TOP VIEW OF UNIT

All dimensions from

rear corner of unit

including panels

35"

(889mm)

109" (2769mm)

3-1/2"

(89mm)

(203mm)

2-7/8"

(73mm)

Front of Unit

Blower

Outlet

Blower

Outlet