Specifications
16
6. Specifications
CAPACITY*
1000 VA / 800 W 2000 VA / 1600 W 3000 VA / 2400 W
INPUT
Low Line Transfer
160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 %
( based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)
Low Line Comeback 175 VAC ± 5 %
High Line Transfer 300 VAC ± 5 %
Voltage
Range
High Line Comeback 290 VAC ± 5 %
Frequency Range 40Hz ~ 70 Hz
Phase Single phase with ground
Power Factor 0.99 @ 220-230 VAC (input voltage)
OUTPUT
Output voltage 208/220/230/240VAC
AC Voltage Regulation ± 3% (Batt. Mode)
Frequency Range 47 ~ 53 Hz or 57 ~ 63 Hz (Synchronized Range)
Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz
Overload
100%~110%: audible warning
110%-130%: UPS shuts down in 30 seconds at battery mode or transfers to bypass
mode when the utility is normal.
>130%: UPS shuts down immediately at battery mode or transfer to bypass mode
when the utility is normal.
Current Crest Ratio 3:1
Harmonic Distortion
3 % THD (Linear Load)
6 % THD (Non-linear Load)
4 % THD (Linear Load)
7 % THD (Non-linear Load)
AC Mode to Batt. Mode Zero
Transfer
Time
Inverter to Bypass 4 ms (Typical)
Waveform (Batt. Mode) Pure Sinewave
EFFICIENCY
AC Mode ~ 85% ~ 88%
Battery Mode ~ 83%
BATTERY
Battery Type 12 V / 7 AH 12 V / 7 AH 12 V / 9 AH
Numbers 3 6 6
Recharge Time 4 hours recover to 90% capacity (Typical)
Charging Current 1.0 A(max.)
Standard
Model
Charging Voltage 41.0 VDC ± 1% 82.1 VDC ±1%
Numbers 3 8
Charging Current 4.0 A or 8.0 A(max.)
Long-run
Model
Charging Voltage 41.0 VDC ± 1% 82.1 VDC ±1%
PHYSICAL
Dimension, D X W X H 397 X 145 X 220 (mm) 421 X 190 X 318 (mm) Tower
Case
Net Weight (kgs) 13 7 26 13 28 13
ENVIRONMENT
Operation Humidity 20-90 % RH @ 0- 40°C (non-condensing)
Noise Level Less than 45dBA @ 1 Meter
MANAGEMENT
Smart RS-232 or USB Supports Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, and MAC
Optional SNMP Power management from SNMP manager and web browser
* Derate capacity to 60% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 208VAC