User manual

Liebert iCOM Display Components and Functions

Accessing Submenus on Small Displays

For navigating to submenus while at the main menu (User, Service or Advanced), use the up and

down arrow keys to scroll through the icons page-by-page. To scroll through the icons one-by-one,

press the enter key and then use the up and down arrow keys. With the desired icon highlighted,

press the enter key to enter that submenu. Once in a Submenu, a list of menu items, each with its

associated parameter, is displayed.

Press the enter key and use the up and down arrow keys to navigate through the parameters one-by-

one. Pressing the Esc key will go back a level. Figure 5 shows the Liebert iCOM menus for a small

display.

Accessing Submenus on Large Displays

Press the enter key from the main iCOM display to access the User, Service and Advanced menus.

Then use the left / right arrows to move among the User, Service and Advanced menus. Press the

enter key to highlight the first icon. Use the arrow keys to navigate through the icons. With the

desired icon highlighted, press the enter key to enter that submenu. Once in a Submenu, a list of

parameters will be displayed.

The up and down arrow keys may be used to scroll through the parameters page-by-page if the

submenu has multiple pages. To scroll item-by-item, press the Enter key and then use the up and

down arrow keys. Using the right or left arrow keys on large displays attached to a network will

change the unit being viewed. Pressing the Esc key will go back a level. Figures 7 and 8 show the

Liebert iCOM menus for a stand-alone large display and for a networked large display, respectively.

2.1.3 Entering a Password

The password must be entered before any value of the menu item parameter can be changed. There

are three levels of password for preventing unauthorized changes. Entering the User menu password

allows the operator the ability to change the parameters in the User menu. The Service menu

password enables the operator to changes parameters in both Service and User. The Advanced menu

password allows the changes to be made in all parameters.

The User menu password is 1490; the Service menu password is 5010.

To enter a password:

1. Navigate to the menu that contains the parameter to be changed.

2. Select Password in the submenu by pressing the Enter key

3. Press the Enter key to move your cursor to the right side of the screen to select the question

marks.

4. Use the arrow keys to enter the numeral for the password’s first digit (the up arrow key moves

from 1 to the next digit).

5. Use the right arrow key to move to the next question mark and repeat Step 4 to enter all digits in

the password.

6. After entering the password, press enter.

If the password is correct, the Actual Level shown to the right of Password will change

from 0 to 1 or 2. The menu will remain locked if the password was incorrect.

NOTE

Settings are readable without a password, but changing settings requires a password.

NOTE

Entering the Service menu password permits access to both the User and Service menus.

NOTE

Returning to the Status menu will require re-entering a password to make changes.