Manualshelf

User manual

ManualsBrandsEmerson ManualsIP PhoneLiebert iCOM
61626364656667686970
User Menu Parameters
60
Figure 43 Display setup screen
Language—Sets the language on the display. Changing this parameter changes all menu
parameters to the selected language.
Date—Sets the internal date of the unit. If this unit is connected to other units with the unit to unit
network connection, all units will reflect the last date set.
Time—This parameter sets the internal time of the unit. If this unit is connected to other units with
the unit to unit network connection. All units will reflect the last time set.
Temperature Indication—Selects the actual and set point temperature indication. Selecting C will
set the unit to display in Celsius and F will set the unit to display in Fahrenheit.
Display Contrast—Changes the contrast of the display to adjust for different viewing angles, low
light and bright light conditions. As the display ages, the contrast may need to be adjusted.
Buzzer Frequency—Changes the audible noise frequency of the built in buzzer. When adjusting the
buzzer frequency the buzzer will sound allowing selection of a frequency that is easily detected when
an alarm occurs.
Backlite Off After X Hours—Controls the length of time that the back-light remains active when
the display is unused. When the buttons on the front display have not been pressed for the time
selected in this parameter, the back-light will turn Off, extending the life of the display and saving
energy.
Display Shows—Selects if the main display shows the temperature and humidity actual values
only, setpoint values only or both actual and setpoint.
Display Colors—Selects the background color. Inverted sets the display to show white font with
blue background; Normal sets a white background with blue font.
Date Format—Changes the month, day and year arrangement shown on the front display and event
time stamps.