User manual

Liebert iCOM Display Components and Functions
9Liebert
®
iCOM
®
Accessing Submenus on Small Displays
For navigating to submenus while at the main menu (User, Service or Advanced), use the up and
down arrow keys to scroll through the icons page-by-page. To scroll through the icons one-by-one,
press the enter key and then use the up and down arrow keys. With the desired icon highlighted,
press the enter key to enter that submenu. Once in a Submenu, a list of menu items, each with its
associated parameter, is displayed.
Press the Enter key and use the up and down arrow keys to navigate through the parameters one-by-
one. Pressing the Esc key will go back a level. Figure 8 shows the Liebert iCOM menus for a small
display.
Display Filtering
Display filtering permits displaying only a single unit in the network on the large display. This allows
each cooling unit to have a large display that acts as a local display Filtering can be enabled in the
User/Display menu.
Accessing Submenus on Large Displays
Press the enter key from the main Liebert iCOM display to access the User, Service and Advanced
menus. Then use the left / right arrows to move among the User, Service and Advanced menus. Press
the enter key to highlight the first icon. Use the arrow keys to navigate through the icons. With the
desired icon highlighted, press the enter key to enter that submenu. Once in a Submenu, a list of
parameters will be displayed.
The up and down arrow keys may be used to scroll through the parameters page-by-page if the
submenu has multiple pages. To scroll item-by-item, press the Enter key and then use the up and
down arrow keys. Using the right or left arrow keys on large displays attached to a network will
change the unit being viewed. Pressing the Esc key will go back a level. Figures 12 and 13 show the
Liebert iCOM menus for a stand-alone large display and for a networked large display, respectively.
NOTE
Settings are readable without a password, but changing settings requires a password.