Installation manual

Network Settings

5.0 NETWORK SETTINGS

The IP Network Settings Menu is used to enable network

communications with the Web card.

Refer to the following sections for detailed step-by-step

instructions on each item from this menu:

Table 8 Network Settings menu guide

Menu item Refer to:

5.1 - Boot/IP Settings page 13

5.2 - Domain Name Server (DNS) Settings page 14

5.3 - Management Protocol page 16

5.4 - Web Server page 21

5.5 - Telnet Server page 26

5.6 - Time (SNTP) Menu page 27

5.7 - Change Username / Password page 28

5.8 - Reset Authentication to Factory Defaults page 29

IP Network Settings Menu

-------------------------

1: Boot/IP Settings

2: Domain Name Server (DNS) Settings

3: Management Protocol

4: Web Server

5: Telnet Server

6: Time (SNTP)

7. Change Administrator Username/Password

8: Change General Username/Password

9: Reset Authentication to Factory

Defaults

<ESC>: Cancel menu level

Please select a key ?>