User manual

Service Menu Parameters
50
Unit Diary—Large Display Only
Shows all entered program changes and maintenance performed on the unit.
Page 4 of 5
Password PASSWORD W - -
VSD Fanspeed FANSPEED W Auto, Manual, Economy Auto
VSD Setpoint STD VSD SET W 60 to 100%
DX =100%
CW = 60%
VSD Setpoint MIN VSD MIN W 60 to 100%
DX =100%
CW = 60%
VSD Setpoint Dehum VSD DEH W 60 to 100%
DX =100%
CW = 60%
VSD Setpoint No Power VSD NOP W 60 to 100%
DX =100%
CW = 60%
Page 5 of 5
Password PASSWORD W - -
SCR Control Type SCR TYPE W Tight, Standard Tight
Start Compressor 1 At CO1 ON W -150 to +100% 0%
Stop Compressor 1 At CO1 OFF W -200 to +50% -200%
Compressor 1 Stop Delay CO1 TD W 0-30 min 20 min
Start Compressor 2 At CO2 ON W -150 to +100% 100%
Stop Compressor 2 At CO2 OFF W -200 to +50% 0%
Compressor 2 Stop Delay CO2 TD W 0-30 min 0 min
Cycle Time CYCLET R 1.0 – 200.0 sec -
SCR Factor SCRFACT W 1.0 to 10.0 1.0
Actual SCR Request ACT SCR R 0-100% -
Table 26 Unit diary parameters
Function
Read/
Write
Range
Metric (Imperial)
Default
Setting
Large Display Small Display
Page 1 of 1
Text entered with iST
(iCOM Service Tool)
N/A R - -
Table 25 Setpoints parameters
Function
Read/
Write
Range
Metric (Imperial)
Default
Setting
Large Display Small Display
°C / °F
% RH
SET