Web Cards Specifications Sheet

1
LIEBERT INTELLISLOT
®
WEB CARDS
LIEBERT INTELLISLOT WEB CARD, LIEBERT INTELLISLOT WEB CARD-LB, LIEBERT INTELLISLOT WEB CARD-LBDS
Note: Liebert IntelliSlot Web cards are a form, fit and function replacement for the existing Liebert OpenComms™ Web cards.
Product Specification/Installation Sheet
Description
The Liebert IntelliSlot Web Card family
delivers enhanced communications and
control to Liebert UPS, Power Management
and Precision Cooling systems.
Liebert IntelliSlot Web cards bring SNMP,
Telnet and Web-management capability to
many models of Liebert UPS, power and
cooling equipment. The cards employ an
Ethernet network to monitor and manage a
wide range of operating parameters, alarms
and notifications.
Additional Features
• SNMP v1, v2c with MIB-II support
• HTTP/HTTPS 1.1
• Telnet
• BootP, DHCP per RFC2131/2132
• Secure Sockets (SSL)
• Remote firmware updates via HTTP
Compatibility With Other Emerson Network Power Products
The Liebert IntelliSlot Web Card family, formerly the OpenComms line, includes:
Liebert IntelliSlot Card Part Number Compatible with:
Liebert IntelliSlot Web Card IS-WEBCARD
• Liebert PowerSure PSI
™
• Liebert GXT
™
• Liebert GXT
™
6kVA
• Liebert GXT
™
10kVA
• Liebert GXT2U
™
• Liebert Nfinity
®
Liebert IntelliSlot Web Card-LB IS-WEBLB • Liebert NX
™
• Liebert Hinet
™
Liebert IntelliSlot Web Card-LBDS IS-WEBLBDS • Liebert DS
™
Precision Cooling unit
Liebert IntelliSlot Card Communication Protocols
The Web cards support the following protocols:
Liebert IntelliSlot Card Part Number
Communication Protocol
SNMP HTTP HTTPS EMAIL SMS TELNET
Liebert IntelliSlot Web Card IS-WEBCARD ✔✔✔✔✔✔
Liebert IntelliSlot Web Card-LB IS-WEBLB ✔✔✔✔✔✔
Liebert IntelliSlot Web Card-LBDS IS-WEBLBDS ✔✔———✔
Wiring Specifications
Connection Supported Wire Type Max. Wire Length
RS-232 Null Modem Cable 50 ft. (15.3m)
DB9F Connector DTE Null Modem Cable 50 ft. (15m)
RJ45 Connector Standard Category 5 Cable 328 ft. (100m)
Network port for
NMS and Web access
DTE serial port for configuration
(requires null-modem connection)