Quick Start Guide

Liebert

IS-WEBRT3 Card

™

Quick Start Guide

NSTALL

• Locate the Liebert IntelliSlot bay on your Liebert equip-

ment. You might need to remove a plastic cover.

• Insert the Liebert IS-WEBRT3 Card into the bay.

• Secure the card with the supplied screws.

• Connect the card to your network with a CAT5 Ethernet

cable.

SET LIEBERT IS-WEBRT3 CARD

PASSWORD

• Insert the Liebert PSI-RT3 Software CD and install Liebert DeskPro-Net Util-

ity on your computer.

• Start Liebert DeskPro-Net Utility by clicking on

Start>Programs>NetAgent>DeskPro-Net Utility. The software will

automatically find and list available Liebert IS-WEBRT3 cards.

• Double-click on a card in the list to launch it.

• Enter an Account (login name) and Password—Record the login and

password and save them in a safe place.

CONFIGURE LIEBERT IS-WEBRT3 CARD

• Highlight the card in the list and click Configure to change the card’s IP

address, subnet mask, and gateway settings (see your network administrator

for the settings).

TheLiebert IS-WEBRT3 card can be used with DHCP or BOOTP, where the sys-

tem assigns an address, but this makes troubleshooting difficult.

• Liebert MultiLink

™

will communicate with the Liebert IS-WEBRT3 card. The

software can be configured to shut down a computer system in response to util-

ity power failure and the UPS’ battery backup time.

Control

functions

Liebert

IS-WEBRT3

cards found

PAGE 1
Liebert® IS-WEBRT3 Card™ Quick Start Guide INSTALL • Locate the Liebert IntelliSlot bay on your Liebert equipment. You might need to remove a plastic cover. • Insert the Liebert IS-WEBRT3 Card into the bay. • Secure the card with the supplied screws. • Connect the card to your network with a CAT5 Ethernet cable. SET LIEBERT IS-WEBRT3 CARD PASSWORD • Insert the Liebert PSI-RT3 Software CD and install Liebert DeskPro-Net Utility on your computer.
PAGE 2
User Manual This Quick Start Guide is designed to give you the information you need to install and configure the Liebert ISWEBRT3 Card. A full user manual, SL-52665, is available online at www.liebert.com. Liebertrecommends that new users consult the user manual. Web Support The IS-WEBRT3 Card delivers Web management and control to Liebert equipment. All users on your network will be able to view status information.