User manual

Data Monitored by Nform
65
B.2 SAMPLE VALUES FROM A UPS
The information available for monitoring varies by type of unit being monitored—the type of UPS,
cooling unit or other SNMP device. Table 15 shows an example of monitoring data points with sam-
ple values obtained from a UPS with an SNMP card.
Table 15 Sample device information available for monitoring - Example for a UPS
Data point Sample value
lcUpsIdentManufacturer Liebert
lcUpsIdentModel GXT700MT-120
lcUpsIdentSoftwareVersion 2.7.3
lcUpsIdentSpecific 1.3.6.1.4.1.476.1.1.1.14
lcUpsIdentFirmwareVersion G_X.10.02
lcUpsIdentSerialNumber 0034200295AF1T1
lcUpsIdentManufacturerDate 07DEC00
lcUpsBatTimeRemaining 0129
lcUpsBatVoltage 27
lcUpsBatCapacity 100
lcUpsInputFrequency 60
lcUpsInputNumLines 1
lcUpsOutputFrequency 60
lcUpsOutputLoad 7
lcUpsInverterStatus 2
lcUpsAlarms 0
lcUpsTestBatteryStatus 2
lcUpsOnBypass (1-unknown, 2-yes, 3-no, 4-maint) 2-yes, 3-no, 4-(maint)_1.3.6.1.4.1.476.1.1.1.1.13.1.0,3
lcUpsBypassFrequency 60
lcUpsBypassNumLines 1
lcUpsConfigType 2
lcUpsConfigBypassInstalled 2
lcUpsConfigModuleCount 0
lcUpsConfigAudibleStatus 2
lcUpsConfigLowBattTime 2