Data Sheet

Bulletin 71.1:MR105
27
Ordering Guide
Body Size (Select One)
NPS 1 / DN 25
NPS 2 / DN 50
NPS 3 / DN 80
NPS 4 / DN 100
Actuator Type (Select One)
Low Pressure
High Pressure
Cage Type (Select One)
Linear (For Gas Service Only)
Quick Open (For Liquid Service Only)
Body Material and End Connection Style (Select One)
Cast Iron
NPT (1 or 2 NPT only)
CL125 FF
CL250 RF
WCC Steel
NPT (1 or 2 NPT only)
CL150 RF
CL300 RF
CL600 RF
PN 16 RF
PN 16/25/40 RF (NPS 1 or 2 / DN 25 or 50 only)
CF8M Stainless Steel
NPT (1 or 2 NPT only)
CL150 RF
CL300 RF
CL600 RF
PN 16 RF
PN 16/25/40 RF (NPS 1 or 2 / DN 25 or 50 only)
CF3M Stainless Steel
NPT (1 or 2 NPT only)
CL150 RF
CL300 RF
CL600 RF
PN 16 RF
PN 16/25/40 RF (NPS 1 or 2 / DN 25 or 50 only)
Diaphragm, O-rings and Seal Materials (Select One)
Nitrile (NBR)
Fluorocarbon (FKM)
Ethylene Propylene (EPDM)
Actuator Type and Outlet Pressure Range (Select One)
NPS 1 / DN 25
Low-Pressure Actuator
5 to 12 psig / 0.34 to 0.83 bar, White
10 to 24 psig / 0.69 to 1.6 bar, Silver
14 to 32 psig / 0.96 to 2.2 bar, Orange
18 to 43 psig / 1.2 to 3.0 bar, Red
High-Pressure Actuator
25 to 60 psig / 1.7 to 4.1 bar, Green
43 to 100 psig / 3.0 to 6.9 bar, White
75 to 175 psig / 5.2 to 12.1 bar, Silver
(1)
110 to 300 psig / 7.6 to 20.7 bar, Orange
(1)
NPS 2 / DN 50
Low-Pressure Actuator
5 to 12 psig / 0.34 to 0.83 bar, White
10 to 24 psig / 0.69 to 1.6 bar, Silver
14 to 32 psig / 0.96 to 2.2 bar, Orange
18 to 43 psig / 1.2 to 3.0 bar, Red
High-Pressure Actuator
25 to 45 psig / 1.7 to 3.1 bar, Green
43 to 100 psig / 3.0 to 6.9 bar, White
75 to 175 psig / 5.2 to 12.1 bar, Silver
(1)
110 to 300 psig / 7.6 to 20.7 bar, Orange
(1)
NPS 3 and 4 / DN 80 and 100
Low-Pressure Actuator
5 to 8 psig / 0.34 to 0.55 bar, White
8 to 20 psig / 0.55 to 1.4 bar, Silver
12 to 30 psig / 0.83 to 2.1 bar, Orange
18 to 39 psig / 1.2 to 2.7 bar, Red
High-Pressure Actuator
39 to 72 psig / 2.7 to 5.0 bar, White
71 to 175 psig / 4.9 to 12.1 bar, Silver
(1)
110 to 250 psig / 7.6 to 17.2 bar, Orange
(1)
Optional
Visual Travel Indicator
Drain Valve
Pressure-Loaded Actuator
NACE Construction
Bleed Valve (for High-Pressure Actuator Only)
- continued -
1. Maximum setpoint is limited to 150 psig / 10.3 bar for constructions with Fluorocarbon (FKM) diaphragm.
Ordering Information
Use the Specications section on page 2 and
carefully review the description to the right of each
specication. Use this information to complete the
Ordering Guide below. Specify the desired selection
wherever there is a choice to be made. Then send
the Ordering Guide to your local Sales Ofce.