Micro Audio System with CD Player Owner's Manual

4
UNPACKING AND SET-UP
•
Carefully remove the unit from the carton and remove all packing material
from the unit.
• Remove any labels or stickers which may be on the front or top of the set, but
do not remove any labels from the back or bottom.
• We suggest that you retain the original carton and packing materials in case it
ever becomes necessary to return your unit for service. This is the only sure
way to protect the unit from damage in transit.
• If you do dispose of the carton and packing materials, please do so properly.
Emerson cares about our environment.
• Press the CD DOOR OPEN
button and remove the dummy CD transit
protection card from the CD mechanism. Discard it.
AC OPERATION
1.) Unwind the AC Power Cord completely.
2.) Insert the plug into any convenient 120V 60Hz AC outlet.
POWER SOURCE
This system is designed to operate on 120V 60Hz AC house current . Connecting
this system to any other power supply could result in damage to the unit which is
not covered by your warranty.You will note that this system is equipped with a
polarized AC power plug having one blade wider than the other. This is a safety
feature. If this plug does not fit into
your existing AC outlet, do not try
to defeat this safety feature by filing
the wide blade to make it fit into your
outlet. If this plug will not fit into
your outlet, you probably have an
out-dated non-polarized AC outlet.
You should have your outlet
changed by a qualified licensed
electrician.
PREPARATION FOR USE
AC Plug
AC Outlet
MS7608_ib061802.p65 17/6/2002, 15:224