Specification Sheet

VersaGraphix Controller

20kHz Ultrasonic Generator

Metal Welding

The VersaGraphiX Controller If you require more, another

makes setup and operation of touch can bring you to the

your ultrasonic process a simple SPC screen.

task. The graphical interface

Languages are not a problem –

was designed with the operator

the program currently supports

in mind. Go/no go results are

fourteen languages.

displayed to simplify the process.

Utilizing Embedded XP as our

For engineers or maintenance

operating system allows the

personnel who require more,

software to be run offline at

a simple touch of the screen

your desk. Splices or assembly

will bring them to setup

drawings can be built or

screen; this screen shows the

downloaded by either a USB stick

actual weld results, along

or through the Ethernet.

with the weld parameters.

Versagraphix Controller

PAGE 1
Versagraphix Controller Metal Welding VersaGraphix Controller 20kHz Ultrasonic Generator The VersaGraphiX Controller makes setup and operation of your ultrasonic process a simple task. The graphical interface was designed with the operator in mind. Go/no go results are displayed to simplify the process. If you require more, another touch can bring you to the SPC screen.
PAGE 2
Versagraphix Controller Metal Welding Control Features: • 1000 presets for sequential welding capability. • 1000 part preset library. • Four USB ports for file transfer. • Ethernet ready. • RS232 connection to interface with Raychem shrink tube machine. • Printer Interface. • Automatic weld parameter calculations based on the crosssectional area of the splice (wire splicing).