User`s guide
Copyright © 2004 EIM COMPANY, INC. • 13840 PIKE ROAD • MISSOURI CITY, TX. 77489
Page 23
Controlinc 1746-C (Version 5.21) Network Master Users Guide (2004-11-18)
Notes:
• Though not much, the diagnostic scan time can also vary with the number of valves in the valve
scan time slice.
• The greater the number of valves configured to be on line, the longer the diagnostic scan time
… more valves to check.
• During normal operations, an operator can use the HMI to force the system into a diagnostic
scan by temporarily changing the “scan period” value in table [0] to a value lower than the
current scan loop counter. This will cause the program to enter a diagnostic scan as soon as
this scan loop has finished.
• Because the diagnostic scan detects faulty communication ports and flags them, there can be a
perceived increased performance in the normal network scans because “off-line” actuators have
already been flagged and will be skipped.