User manual

Accessing an RPC2 Communications Module via the Web Interface
Emerson
®
RPC2
™
40
Users
From the User Names page, an administrator can add or delete users and change user passwords.
To add a user:
1. From the System tab’s navigation tree, click Authorization>Users.
2. Click the Create Local User icon.
3. Enter the username and password and confirm the password.
4. Click the Save icon, ✔.
To delete a user:
1. From the System tab’s navigation tree, click Authorization>Users.
2. Check the box next to the user to be deleted.
3. Click the Delete Local User icon.
4. Click OK when prompted.
To change a user password:
1. From the System tab’s navigation tree, click Authorization>Users.
2. Check the box next to the user whose password to be changed.
3. Click the Change Local User’s Password icon.
-or- To change your own password, from the side navigation bar of the System tab, click
Authorization>Change Password.
4. Enter and confirm the new password.
5. Click the Save icon, ✔.
NOTE
The administrator’s user password cannot be changed on this page.