User manual

RPC BDM

™

(Optional)

Emerson

RPC2

™

5.5.2 Types of Data Available at PDU, Branch and Receptacle Levels

The following table shows the types of data available at each level.

5.5.3 Viewing Active Events

When an event is detected, the display switches to the PDU view with an Active Events icon in the

bottom right corner of the screen, shown below left.

• Scroll to the Active Events icon (see below left), then press the scroll button to select it.

• The information view displays a list of events with icons to indicate severity (below right).

• To view details for any listed event, scroll to that event, then press the scroll button.

5.6 RPC BDM: PDU Explorer

The PDU Explorer uses a hierarchy to display data from connected equipment, starting with the PDU

view at the highest level (default opening view), allowing users to browse down one level to view

branches, then down another level to the receptacle view.

Table 14 Monitoring data available on the RPC BDM via PDU Explorer

Data available PDU Branch Receptacle

Graph of power utilization ✔ (each phase) ✔✔

Amperage of selected module ✔ (each phase) ✔✔

Voltage of selected module ✔✔✔

Wattage of selected module ✔✔✔

VA of selected module — ✔✔

State: On/Off — ✔✔

NOTE: Branch and Receptacle data may vary depending on the MPX BRM model and Liebert MPH

™

capabilities.

Active Events Icon

MPH2

119.7V

0kWh

1.98A

204W

24°C

Low Humidity Sensor

PDU View Active Events