User manual

RPC BDM
™
(Optional)
45 Emerson
®
RPC2
™
5.6.1 View PDU Data
To view data for a PDU:
• Select a PDU number in the bottom left corner. The selected number will be highlighted.
• The screen displays information for the selected PDU. The example below shows data for PDU #1,
one of two PDUs that are communicating with the RPC BDM unit.
• The PDU view displays information collected at the PDU input point for each of the three input
phases: L1, L2 and L3. Up to three phases may be used.
• See Table 15 for explanations of components that appear on the screen.
Table 15 PDU view components
# Item Item Description Purpose
1
Component
Identification
Displays an icon to indicate the type of component selected—PDU in
this example—as well as the user-assigned name (e.g., MPX1).
2
Power Utilization
Graph
Graphically displays the approximate power utilization of each input
phase. The display automatically scrolls from phase to phase. The bar
for the selected phase appears dark, with the input phase number
displayed below the bar.
3 Amperage Displays the amperage of the selected phase.
4 Voltage, Total Power Displays voltage of each line and total power for the selected PDU.
5 Rack PDU ID Number Select a PDU to view its information.
6
!
Active Events
Go to a screen to view active events for the selected component. This
button appears only when active events are detected.
7
i
Information*
Select to view ratings and serial number information for the Rack PDU
and access screens providing temperature and IP address information.
See example of PDU level information screen* below.
8 Network Select to view other rack PDU’s on the network.
9 Device Explorer
Select to view a list of user-assigned labels of receptacles. See 5.7 -
RPC BDM: Receptacle Information for more detail.
MPH2
121.1V 359W
2.96 A
2kWh
1 2 3 4
i
!
3
6
8
9
2
1
4
5
X
Active Event icon
7
2.96 A
119.7V 203W
1 2 3 4
MPH2
121.1V 359W
2.96A
2kWh
1
i
!
IP: 162.1.30.57
MAC ID: 00:00:84:47:31:49
RPC2 FW Ver: 7.0.0.1
* Example of PDU
level information
screen
View IP & MAC addresses
and firmware information