User manual

RPC BDM
™
(Optional)
47 Emerson
®
RPC2
™
5.6.3 View Receptacle Data
The availability of receptacle information depends on the capabilities of the PDU.
To view data for a receptacle:
• Select a receptacle number in the bottom left corner. The selected number will be highlighted.
• The screen displays information for the selected receptacle. The example below shows data for
Receptacle #7, one of eight receptacles on Branch #A of PDU #1 that are communicating with the
RPC BDM unit.
• See Table 17 for explanations of components that appear on the screen.
• A list of receptacles may be viewed (see 5.7 - RPC BDM: Receptacle Information for details).
Table 17 Receptacle view components
# Item Item Description Purpose
1
Component
Identification
Displays an icon to indicate the type of component selected—
receptacle in this example—as well as the receptacle ID, which is in
the format:
PDU# - Branch# - Receptacle#
(See 3.2 - Rack PDU Component ID for details.)
2
Power Utilization
Graph
Graphically displays the approximate power utilization of the selected
components.
3 Amperage Displays the amperage of the selected module.
4
Voltage, Power,
Apparent Power
Displays voltage, power and apparent power for the selected
receptacle.
5 Receptacle ID Letter Select a given receptacle to view its information.
6 Information*
Select to view information about the selected receptacle. See example
of receptacle level information screen* below.
7 Up One Level Move up one level—in this example, from receptacle to branch view.
8 On/Off status Displays an icon to indicate whether the module is On or Off .
1-A-7
119.7V
237VA
i
1.98 A
203W
1 2 3 4 5 6 7 8
3
6
7
8
2
1
4
5
X
Active Event
icon
1-A-7
119.7V
237VA
i
1.98 A
203W
1 2 3 4 5 6 7 8
IP: 162.1.30.57
MAC ID: 00:00:84:47:31:49
RPC2 FW Ver: 7.0.0.1
* Example of receptacle
level information
screen
View IP & MAC addresses
and firmware information
View Receptacle
Information