user manual

ManualsBrandsEmerson ManualsCarbon Monoxide AlarmOzone Sensor PN 51A-499AOZ

Model 499A OZ

Ozone Sensor

Instruction Sheet

PN 51A-499AOZ/rev.H

September 2010

SPECIFICATIONS - SENSOR

Pressure: 0 to 65 psig (101 to 549 kPa abs)

Temperature: 32 to 122°F (0 to 50°C)

Process Connection: 1 inch MNPT

Wetted Parts: Polysulfone, Viton

, Teflon

TFE, silicone

Cathode: gold

Type PN Wetted Materials Process Connection Maximum Temperature Maximum Pressure

1-1/2 in. tee 23567-00 CPVC, Buna N 1-1/2 in. socket

122°F (50°C)

65 psig (549 kPa abs)

915240-03 3/4 in. NFPT

2 in. tee 915240-04 PVC, Buna N 1 in. NFPT 120

F (49

C) 60 psig (515 kPa abs)

915240-05 1-1/2 in. NFPT

Low Flow* 24091-00 Polyester/polycarbonate, Compression fitting for

158°F (70°C)

90 psig (722 kPa abs)

316SS, silicone 1/4 in. OD tubing

Viton is a registered trademark of E.I. duPont de Nemours & Co.

Teflon is a registered trademark of E.I. duPont de Nemours & Co.

SPECIFICATIONS - FLOW CELLS

For additional information, please visit our website

at www.emersonprocess.com/raihome/liquid/.

Pressure and temperature specifications for the low flow cell exceed the temperature and pressure specifications for the sensor.

CAUTION

Do not exceed pressure and temperature specifications.

Pressure: 65 psig max (549 kPa abs max)

Temperature: 32 to 122°F (0 to 50°C)

CAUTION

SENSOR/PROCESS APPLICATION COMPATIBILITY

The wetted sensor materials may not be compatible

with process com position and operating conditions.

Application compat ibility is entirely the responsibility of

the user.

Summary of content (8 pages)

PAGE 1
Instruction Sheet PN 51A-499AOZ/rev.H September 2010 Model 499A OZ Ozone Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION CAUTION SENSOR/PROCESS APPLICATION COMPATIBILITY The wetted sensor materials may not be compatible with process composition and operating conditions. Application compatibility is entirely the responsibility of the user. Do not exceed pressure and temperature specifications.
PAGE 2
MODEL 499A OZ INSTALLATION INSTALLATION Install the sensor in a flowing sample. Keep the sample flow as constant as possible at a value within the limits below. Flow through Open channel Low flow cell 1 to 5 gpm (3.8 to 19 L/min) 1 ft/sec (0.3 m/sec) 2 to 5 gph (7.6 to 19 L/hr) The Model 499AOZ sensor is NOT recommended for submersion into tanks, basins, or ponds. 2 FIGURE 1. Sensor Orientation FIGURE 2. Flow-Through 2 in. Tee FIGURE 3. Flow-Through 1-1/2 in. Tee FIGURE 4.
PAGE 3
MODEL 499A OZ WIRING WIRING FIGURE 5. Wiring Sensor with Standard Cable to Model 54eA Analyzer FIGURE 6. Wiring Sensor with OptimumEMI/RFI or Variopol Cable to Model 54eA Analyzer FIGURE 7. Wiring Sensor with Standard Cable to Model 1056 and Model 56 Analyzer FIGURE 8.
PAGE 4
MODEL 499A OZ 4 WIRING FIGURE 9. Wiring Sensor with Standard Cable to 5081-A Transmitter. FIGURE 10. Wiring Sensor with Optimum EMI/RFI or Variopol Cable to 5081-A Transmitter. FIGURE 11. Wiring Sensor with Standard Cable to Xmt-A Transmitter. FIGURE 12. Wiring Sensor with Optimum EMI/RFI or Variopol Cable to Xmt-A Transmitter.
PAGE 5
MODEL 499A OZ FIGURE 13. Wiring Sensor with Standard Cable to Model 1066 Transmitter. WIRING FIGURE 14. Wiring Sensor with Optimum EMI/RFI or Variopol Cable to Model 1066 Transmitter. When making connections through a junction box (PN 23550-00), wire point-to-point. NOTE: Use a wire nut and pigtail (included) when connecting several wires to the same terminal. FIGURE 15.
PAGE 6
MODEL 499A OZ MAINTENANCE MAINTENANCE Periodic maintenance and cleaning is required for best performance of the sensor. Generally, the membrane and fill solution should be replaced every four to six months. Sensors installed in harsh or dirty environments require more frequent maintenance. The optimum maintenance frequency is best determined by experience.
PAGE 7
MODEL 499A OZ MAINTENANCE FIGURE 16.
PAGE 8
MODEL 499A OZ ORDERING INFORMATION The right people, the right answers, right now. ON-LINE ORDERING NOW AVAILABLE ON OUR WEB SITE http://www.raihome.com Specifications subject to change without notice. 8 Credit Cards for U.S. Purchases Only. Emerson Process Management 2400 Barranca Parkway Irvine, CA 92606 USA Tel: (949) 757-8500 Fax: (949) 474-7250 http://www.raihome.com © Rosemount Analytical Inc.