Manualshelf

Instructions / Assembly

ManualsBrandsEmerson ManualsHeating, Ventilation, and Air ConditioningSingle Stage 5-2 Day Programmable Thermostat
11121314151617181920
14
5.2 Cooling system
To prevent compressor and/or property damage, if the outdoor temperature is below 50°, DO NOT operate the cooling system
CAUTION
!
This thermostat has a time delay between cooling cycles to allow the head pressure in the compressor to stabilize.
If the temperature is adjusted to call for cool within 5 minutes of the last cycle the snowflake icon will blink indicating
the thermostat is locked out. After 3 to 5 minutes, the compressor will start and the snowflake icon will stop flashing.
This helps prevent the compressor from cycling too quickly and is normal operation for the thermostat.
1. Move SYSTEM switch to COOL position.
2. Press to adjust thermostat setting below room temperature. The blower should come on immediately on
high speed, followed by cold air circulation
3. Press to adjust temperature setting above room temperature. The cooling system should stop operating.