Manualshelf

Instructions / Assembly

ManualsBrandsEmerson ManualsHeating, Ventilation, and Air ConditioningSingle Stage 5-1-1 Day Programmable Thermostat
21222324252627282930
29
If the outside temperature is below 50° F, disconnect power to the cooling system before programming. Energizing the air conditioner
compressor during cold weather may cause personal injury or property damage.
CAUTION
!
1. Move SYSTEM switch to COOL position.
2. Follow the procedure for entering your heating program, using your selected cooling times and temperatures.
6.5 Check Your Programming
Follow these steps to check your thermostat programming one nal time before beginning thermostat operation.
1. Move SYSTEM switch to HEAT position.
2. Press PRGM to view the 1st weekday heating period time and temperature. Each time you press PRGM, the
next heating period time and temperature will be displayed in sequence for weekday, then weekend program
periods (you may change any time or temperature during this procedure).
3. Press RUN.
4. Move SYSTEM switch to COOL position.
Enter cooling program