Manualshelf

Use and Care Manual

ManualsBrandsEmerson ManualsHeating, Ventilation, and Air ConditioningSingle Stage 5-1-1 Day Programmable Thermostat
11121314151617181920
13
5.2 Heating system
1. Move SYSTEM switch to HEAT position. If the heating system has a standing pilot, be sure to light it.
2. Press to adjust thermostat setting room temperature. The heating system should begin to operate.
3. Press to adjust temperature setting below room temperature. The heating system should stop operating.
5.3 Cooling system
1. Move SYSTEM switch to COOL position.
2. Press to adjust thermostat setting below room temperature. The blower should come on immediately on high
speed, followed by bold air circulation.
3. Press to adjust temperature setting above room temperature. The cooling system should stop operating.
To prevent compressor and/or property damage, if the outdoor temperature is below 50°, DO NOT operate the cooling system