Manualshelf

Use and Care Manual

ManualsBrandsEmerson ManualsHeating, Ventilation, and Air ConditioningSingle Stage 5-1-1 Day Programmable Thermostat
11121314151617181920
20
6.3 Conguration menu
The conguration menu allows you to set certain thermostat operating characteristics to your system or personal
requirements.
Press RUN to make sure the thermostat is in the run program mode, then press PRGM and RUN at the same time
to enter the conguration menu. The display will show the rst item in the conguration menu.
The conguration menu table summarizes the conguration options. An explanation of each option follows.
Press HOLD to change to the next menu item or press TIME to go backwards to the previous item in the menu. To
exit the menu and return to the program operation, press RUN. If no keys are pressed within fteen minutes, the
thermostat will revert to normal operation.
1. Select Temporary Hold Time – The thermostat can hold any temperature you set it to for the amount of time
you select on this option. Your choices are 0:00 to 8:00 hours in 15 minute increments. 0:00 disables the func-
tion
Example:
1. You have selected 3:00 hours for the Temporary Hold time period.
2. With the thermostat set to Heat or Cool, press HOLD for approximately ve seconds until HOLD time (3:00
indicating 3 hours) appears as a setting reminder.