User manual

Fisher ROC Serial Driver Help

See Also:

Operator Identification

Address Specification

ROC initialization error: Unable to retrieve I/O map

Error Type:

Fatal

Possible Cause:

Access to the I/O Map has been restricted for the current user.

Solution:

Check the Operator Identification settings (such as, username, password, and access level) and verify that they

are correct.

See Also:

Operator Identification

Serialization of EFM data to temporary file '<file name>' failed. Reason: '<file

I/O error>'

Error Type:

Warning

Possible Cause:

1. The driver was unable to create the specified file directory.

2. The driver was unable to access the specified file.

Solution:

1. Verify that the disk has sufficient disk space.

2. Verify user permissions for the specified file directory.

The username or password supplied was not accepted. Error = 6

Error Type:

Fatal

Possible Cause:

An access level has been enabled on the device but not in the driver.

Solution:

Check the Operator Identification settings and make sure the Enable Access Level checkbox is checked.

See Also:

Operator Identification

The username or password supplied was not accepted. Error = 63

Error Type:

Fatal

Possible Cause:

The access level that has been enabled on the device is lower than the operator's access level.

Solution:

Check the Operator Identification settings and make sure the operator's access level is less than or equal to the

access level enabled in the device.

See Also:

Operator Identification