Brochure

10
Surge protection
STV 100K SERIES
SolaHD’s STV 100K hardwired surge protective devices are
designed for installation at the service entrance, branch panel or
a dedicated sensitive electronic load. ese units feature all mode
protection, LED and audible alarm status indication, sinewave
tracking and form “C” dry contacts. e STV 100K series also
contains the highest levels of safety built into the product including
thermal fusing and a fault current fusing level of 65 kAIC.
Applications
• Distribution Panels (<1200 A)
• Branch, Lighting and Control Panels
• Factory Automation Installations
• Dedicated Industrial Equipment
Features
• 100,000 amp peak current rating provides all mode
protection against severe transients
• UL 1449 3rd edition, Type 2, 3kA I-nominal approved device
• Low clamping levels for more eective protection
• 65 kAIC fault current fusing level provides safety
and NEC conformance
• LED status and audible alarms
• Compact, rugged metal
Selection Table
CATALOG NUMBER INPUT VOLTAGE
STV 100K-10S
120/240 V Single Phase, 3-Wire + Ground
STV 100K-10Y
208 Y/120 V ree Phase, Wye 4-Wire + Ground
STV 100K-10N
120 V Single Phase, 2-Wire + Ground
STV 100K-24L
240 V Single Phase, 2-Wire + Ground
STV 100K-23Y
230 Y/400 V ree Phase, Wye 4-Wire + Ground
STV 100K-27Y
480 Y/277 V ree Phase, Wye 4-Wire + Ground
STV 100K-24D
240 V ree Phase, ∆ 3-Wire + Ground
STV 100K-48D
480 V ree Phase, ∆ 3-Wire + Ground
STV 100K-10D4
240/120 CT ree Phase, ∆ 4-Wire + Ground
STV 100K-24D4
480/240 CT ree Phase, ∆ 4-Wire + Ground
Dimensions
Figure 1: Mechanical Dimensions
Unit shown is a three-phase wye
6.00
(152.4)
6.75
(171.5)
0.38
(9.7)
4.00
(101.6)
0.10
(2.5)
3.20
(81.3)
0.50
(12.7)
2.00
(50.8)
E324279