Installation manual

1592010870 XWEB3000_5000 EVO STP GB r1.0 2014.06.16.doc XWEB3000/5000 EVO 6/20
3. PACKAGE
Before opening the package make sure that the packaging is intact and that there is no sign of impact or
tampering. Before starting any operation, it is necessary to check that the XWEB-EVO box contains:
 1 XWEB-EVO Unit
 1 power cord
 2 RACK mount brackets
 8 Screws to attach the RACK brackets to the XWEB Box
 Disconnectable female connectors (2x2-way, 2x3-way, 1x6-way)
 4 Rivet feet for table set-up
 6 Jumpers WITHOUT CLIPS for terminators (JMP1-6)
 1 DVI-VGA Converter
 1 Rapid Installation Manual in A5 format
 1 CD-ROM or USB-KEY, with relative manual and software
If one of the following parts is damaged, promptly contact your dealer.
You can also receive a modem - which will not be included in the same package - as an option. When using
a connection through the modem, always make sure that the type of modem you are about to install is a
Dixell-approved model; accordingly, Dixell will not be held responsible for the poor operation of devices that
are not expressly approved. The user manual, in the "manuals" section of the Dixell site, contains a list of
supported models.