60cm 4 Zone Ceramic Cooktop Instruction book and installation manual MODEL: EMCER64E Congratulations on the purchase of your new cooktop. We recommend that you spend some time to read this manual to fully understand how to use the cooktop. The manual contains the installation guide for use by a qualified installer to ensure installation meets regulatory requirements and manufacturer’s specifications.
SAFETY WARNINGS Please read this user manual thoroughly before attempting to use this appliance for the first time. This manual contains valuable information on the safe installation, use and care of the appliance. Keep these instructions for reference and pass them on to future user. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance. • Connection to a good earth wiring system is essential and mandatory.
• To avoid a hazard, this appliance must be installed according to these installation instructions. • This appliance must be properly installed and earthed, only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • Failure to install the appliance correctly could invalidate any warranty or liability claims.
• Metallic objects such as knives, forks, spoons, and lids should not be placed on the cooktop surface as they can become extremely hot • Keep children away. • Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones. Keep handles out of reach of children. • Failure to follow this advice could result in burns and scalds. Cut Hazard • The razor-sharp blade of a cooktop scraper is exposed when the safety cover is retracted.
• Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use. • Children or persons with a disability which limits their ability to use the appliance should have a responsible and competent person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings.
WARNING: The appliance and its accessible parts become hot during use. • Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. • Children shall not play with the appliance. • Cleaning and user maintenance shall not be made by children without supervision. WARNING: Unattended cooking on a cooktop with fat or oil can be dangerous and may result in fire.
GUIDE TO FEATURES OF THE COOKTOP Model EMCER64E Power Zones Model # Power of zone - 1 Power of zone - 2 Power of zone - 3 Power of zone - 4 Total Power EMCER64E 1100/2200W 1200W 1800W 1200W 6400W Control Panel Symbols KEY # FUNCTIONS KEY # FUNCTIONS Key 1. ON/OFF Key 6. Timer Key 2. MINUS Key 7. Dual zone Key 3. PLUS / Key 4. Zone selection / Key 5.
Before using your New Cooktop • • Read this guide, taking special note of the ‘Safety Warnings’ section. Remove any protective film that may still be on your cooktop. Using the Touch Controls • • The controls respond to touch, so you don’t need to apply any pressure. Use the ball of your finger, not its tip. • • You will hear a beep each time a touch is registered. Make sure the control panel is always clean, dry, and that there is no object, for example a utensil or a cloth covering them.
Using your Cooktop Switching the cooktop on and off Switch the cooktop power on and off by using the separate main switch. 1. Touch the ON/OFF key (1). All the indicators show “- “. 2. Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan and the surface of the glass are clean and dry. 3. 4. Select zone (4), an indicator next to the key will flash. Select power level by touching the MINUS (2) or PLUS key (3).
Upon selecting the cooking zone, only the center zone will be turned on, to activate the outer zone: 1. Select a cooking zone with the extendable zone function. 2. Touch the extendable zone key (7), the indicator display will show “ = ” To cancel the outer zone, press the extendable zone key (7) to turn off the second heating circuit, then select the desired power level by touching the power adjusting keys.
Using the Timer You can use the timer in two different ways: 1. You can use it as a minute minder. In this case, the timer does not turn any cooking zone off when the set time is up. 2. You can use it as a cut off timer to turn one or more cooking zones off when the set time is up. You can set the timer up to 99 minutes. Using the Timer as a Minute Minder Make sure the cooktop is turned on, and that no cooking zones are in selecting mode.
If the timer is set on more than one zone: 1. When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. The minute display shows the remaining time. The dot of the corresponding zone flashes. 2. Once the countdown timer expires, the corresponding zone will switch off. Then it will show the remaining time on the other zone and the dot of that zone will flash. 3.
Important! • When the cooktop is switched off at the main switch, there will be no ‘hot surface’ indicator, but the cooking zone may still be hot! Take extreme care! • Heavy-duty scourers, some nylon scourers and harsh/abrasive cleaning agents may scratch the glass. Always read the label to check if your cleaner or scourer is suitable. • Never leave cleaning residue on the cooktop: the glass may become stained. • Remove stains left by melts and sugary food or spill overs as soon as possible.
Error Code If an abnormality arises, the cooktop will enter the protective state automatically and display corresponding protective codes: Error Codes Problem E0 & repeated beep sound warning. Possible causes What to do Stop cooking till the internal temperature back to normal. Please contact after sales service to check the cooktop if there is PCB failure. Overheating protection: the cooktop is over heated. Open circuit failure of thermocouple E1 Please contact after sales service.
ATTENTION: In all circumstances, make sure the cooktop is well ventilated and the air inlet and outlet are not blocked. Ensure the cooktop is in good working state. Note: The safety distance between the cooktop and the cupboard above should be at least 760mm. The minimum height for a rangehood above the cooktop is 650mm. A (mm) B (mm) C (mm) D E 760 50 minimum 20 minimum Air intake Air exit 5mm X(mm) Y(mm) 100 minimum 20 minimum Weight and Dimensions are approximate.
• you consult local building authorities and by-laws if in doubt regarding installation. • you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces surrounding the cooktop. Before locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the cooktop. Stretch out and stick the supplied tape [02] along the underside edge of the cooktop, ensure the ends overlap.
When you have installed the cooktop, make sure that • the power supply cable is not accessible through cupboard doors or drawers. • there is adequate flow of air from outside the cabinetry to the base of the cooktop. • if the cooktop is installed above a drawer or cupboard space, a thermal protection barrier is installed below the base of the cooktop. • the isolating switch is easily accessible by the customer. Cautions 1. The cooktop must be installed by qualified personnel or technicians.
To connect the cooktop to the mains power supply, do not use adapters, reducers, or branching devices, as they can cause overheating and fire. The power supply cable must not touch any hot parts and must be positioned so that its temperature will not exceed 75˚C at any point. The electrician must confirm whether the domestic wiring system is suitable without alterations. Any alterations must only be made by a qualified electrician. Cable maintenance 1.
PRODUCT WARRANTY DETAILS Thank you for choosing an Emilia Appliance, the purchase of this appliance is an important investment in your home and so to protect your investment we urge you to complete the registration card attached, please return it immediately. IT IS A WARRANTY REQUIREMENT THAT PROOF OF PURCHASE BE PROVIDED PRIOR TO REQUESTING A SERVICE CALL. THIS WARRANTY SHALL NOT APPLY IF THE APPLIANCE WAS NOT INSTALLED BY A LICENSED TECHNICIAN AND PROOF IS NOT SUPPLIED.
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This appliance is labeled in compliance with European directive 2002/96/EC for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way.