User Guide

File: KappaPro10ALargeMidHighBox.bb6
KappaPro10A Mid High Box, Hi Power, Hi F3, Use with a Sub
By McJerry, Eminence Speaker LLC
Displacement and thermally limited to 500 watts. Use a 24 dB per octave high pass filter set to 120 Hz or higher.
Great, super high power floor monitor, or as a medium sized mid/high box.
Box Properties
--Description--
Name:
Type: Vented Box
Shape: Prism, square
--Box Parameters--
Vb = 0.4 cu.ft
V(total) = 0.461 cu.ft
Fb = 110 Hz
QL = 7
F3 = 102.1 Hz
Fill = minimal
--Vents--
No. of Vents = 2
Vent shape = round
Vent ends = one flush
Dv = 3.091 in
Lv = 5.014 in
Driver Properties
--Description--
Name: Kappa Pro-10
Type: Standard one-way driver
Company: Eminence Speaker LLC
Comment: Revised Sep-2002
Piston: Paper cone.
Suspension: Cloth surround.
Dust Cap: Solid paper dust cap.
Frame: Diecast aluminum basket.
Voice Coil: 3 inch (76.2 mm) copper.
Magnet: 80 oz ferrite magnet.
--Configuration--
No. of Drivers = 1
--Driver Parameters--
Fs = 46 Hz
Qms = 10.1
Vas = 52.2 liters
Xmax = 3.2 mm
Sd = 344.9 sq.cm
Qes = 0.2
Re = 6.5 ohms
Le = 1.15 mH
Z = 8 ohms
Pe = 500 watts
Normalized Amplitude Response (dB-SPL/Hz)
Eminence Designer
dB
6
0
-6
-12
-18
-24
-30
-36
5 Hz 10 50 100 500 1 K 5 K 10 K 20 K
Custom Amplitude Response (dB-SPL/Hz at 1 m) with 500 watts
Eminence Designer
dB
130
124
118
112
106
100
94
88
5 Hz 10 50 100 500 1 K 5 K 10 K 20 K
Maximum Acoustic Power (dB-SPL/Hz at 1 m)
Eminence Designer
dB
129
123
117
111
105
99
93
87
5 Hz 10 50 100 500 1 K 5 K 10 K 20 K