Specification Sheet

The APT:80S, 150S, and 200S horn flares on page 1 are available separately for use with any 1” exit driver with 1 3/8” ext. thread.
horn flares and waveguides
H290s H14EA H2EA SST1
Type
Exponential Exponential Exponential Constant Directivity
Throat Size
1.0”, 25.4 mm 1.4”, 35.6 mm 2.0”, 50.8 mm 1.0”, 25.4 mm
Attachment Method
Screw-on or Bolt-on (H290B) Bolt-on Bolt-on Bolt-on
Dispersion
90 x 40 60 X 40 60 x 40 90 x 40
Recommended
Crossover
1.0 kHz 600 Hz 700 Hz 1.0 kHz
Width/Height/Depth 11.7” x 6.6” x 6.6”,
297.2 x 167.6 x 167.6 mm
12.60” x 7.50” x 7.90”,
320 x 190.5 x 200.7 mm
12.4” x 7.3” x 6.1”,
315 x 185.4 x 154.9 mm
9.8” x 7.7” x 5.2”,
249 x 196 x 132 mm
Cut-out 9.7 x 4.9”,
246 x 124 mm
11.3 x 6.1”,
287 x 155 mm
11.3 x 6.3”,
287 x 160 mm
8.5” x 6.4”,
216 x 163 mm
Weight
1.10 lb., 0.50 kg 4.80 lb., 2.18 kg 4.90 lb., 2.22 kg 1.80 lb., 0.82 kg
Material
ABS Aluminum Aluminum ABS
WG10 LA-WG10 LA-WG14 BH410
Type
Waveguide Line Array Waveguide Line Array Waveguide Exponential
Throat Size
1.0”, 25.4 mm 1.0”, 25.4 mm 1.4”, 35.6 mm 1.0”, 25.4 mm
Attachment Method
Bolt-on Bolt-on Bolt-on Screw-on
Dispersion
70 x 60 140 X 15 140 x 15 60 x 60
Recommended
Crossover
1.4 kHz 1.8 kHz 1 kHz 1.2 kHz
Width/Height/Depth 11.6” x 8.6” x 4.5”,
295 x 218 x 114 mm
3.5” x 4.4” x 4.4”,
89 x 112 x 112 mm
5.2” x 6.4” x 7.1”,
131 x 163 x 181 mm
5.59” x 5.59” x 4.38”,
142 x 142 x 111.3 mm
Cut-out
10.4 x 7.4”, 264 x 188 mm 1 x 4”, 25.4 x 102 mm 1 x 6”, 25.4 x 152.4 mm
3.56 x 3.56”,
90.4 x 90.4 mm
Weight
1.10 lb., 0.50 kg 0.96 lb., 0.43 kg 2.5 lb., 1.13 kg 0.35 lb., 0.16 kg
Material
ABS Aluminum Aluminum ABS