Datasheet

The Art and Science of Sound
Nominal Basket Diameter
Nominal Impedance*
Power Rating**
Watts
Music Program
Resonance
Usable Frequency Range***
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter
Specication
Resonant Frequency (fs)
DC Resistance (Re)
Coil Inductance (Le)
Mechanical Q (Qms)
Electromagnetic Q (Qes)
Total Q (Qts)
Compliance Equivalent Volume (Vas)
Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Efciency Bandwidth Product (EBP)
Maximum Linear Excursion (Xmax)
Surface Area of Cone (Sd)
Maximum Mechanical Limit (Xlim)
Thiele & Small Parameters
Recommended Enclosure Volume
Sealed
Vented
Overall Diameter
Bafe Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Net Weight
Shipping Weight
Mounting Information
Materials of Construction
Coil Construction
Coil
Magnet Composition
Core Details
Basket Materials
Cone Composition
Cone Edge Composition
Dust Cap Composition
LEGEND CB15
Please inquire about alternative impedances.
Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.
The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.
Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
calibrated) mounted 1m from wall/bafe | 2 ft. X 2 ft. bafe is built into the wall with the speaker mounted ush against a steel ring for minimum diffraction | Haer P1500 Trans-Nova amplier | 2700 cu.ft. chamber with
berglass on all six surfaces (three with custom-made wedges)
*
**
***
Recommended for professional bass guitar applications in a sealed or vented enclosure.
15", 381mm
8 ohms
300W
600W
34Hz
47Hz-3kHz
98
80 oz
0.375", 9.53mm
2.5", 63.5mm
34Hz
6.15
0.33mH
5.9
0.36
0.34
336 ltr/11.9 cu. ft.
411cc
0.31mm/N
16.0 T-M
70 grams
95
4.8mm
856.3cm
2
9.5mm
54-65 ltr/1.9-2.3 cu. ft.
54-159 ltr/1.9-5.6 cu. ft.
15.21", 386.4mm
14.0", 355.3mm
Fitted as Standard
Fitted as Standard
0.28", 7.1mm
14.56", 369.9mm
6.5", 165mm
17.3 lbs, 7.9 kg
19.4 lbs, 8.8 kg
Copper
Polyimide
Ferrite
Vented And Extended
Die-Cast Aluminum
Paper
Cloth
Solid Composition Paper