Specification Sheet

Nominal Basket Diameter
Nominal Impedance*
Power Rating*
Resonance (Fs)
Usable Frequency Range
Sensitivity*
DC Resistance (Re)
Qts
Magnet Weight
Gap Height
Voice Coil Diameter
Specification Mounting inforMation MaterialS of conStruction
freQuencY reSponSe & iMpedance curve
*
Enclosure Type
Closed Back
Open Back
Driver Volume Displaced
Overall Diameter
Baffle Hole Diameter
Depth
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Net Weight
Shipping Weight
Visit eminence.com to find a dealer near you.
* See footnotes on page 2 for information regarding usable frequency range,
nominal impedance, power rating and sensitivity.
Offering complete tonal balance from
top to bottom, this attack-sensitive and
powerful 12” model was co-developed
with veteran session and touring pro
Paul Franklin. With headroom to spare,
the PF-350’s tone transfers from low
volume to very loud with warmth and
clarity, making it ideal for pedal steelers
and 6-stringers alike.
PF-350
12”, 305 mm
8 Ω
350 W
62.6 Hz
65 Hz – 3.5 kHz
99 dB
7.41 Ω
0.42
109 oz.
0.285”, 7.24 mm
4”, 101.6 mm
Acceptable
Acceptable
0.1 cu.ft., 2.9 liters
12.29’’, 312.2 mm
11.06’’, 280.9 mm
5.0”, 127 mm
Yes
Yes
0.27’’, 6.9 mm
11.69’’, 296.9 mm
21.5 lbs , 9.75 kg
23.7 lbs , 10.75 kg
Paul Franklin Signature
Edge wound aluminum voice coil
Polyimide former
Ferrite magnet
Undercut core
Die-cast aluminum basket
Paper cone
Cloth edge
Paper dust cap
“I finally have a speaker with complete balance, from highs to lows, where one frequency never dominates another. It gives me
the flexibility to use my amp to dial in any type of sound while faithfully delivering beautiful tone at any volume.” – Paul Franklin
12”
350 WATTS
8 Ω
20 Hz 50 100 200 500 1K 2K 5K 10
K20K
dBSPL
65
70
75
80
85
90
95
100
105
Ohm
8
9
10
20
30
40
50
60
70
80
90
100
200