Specifications

3 | ENGLISH
2.0 Front and rear panel description
2.1 Front panel
Figure 1-1 shows the front panel of the switch.
Ports :
These ports are connection points for PCs and other network devices, such as
additional switches.
2.1.1 LED Indicator description
You can see the switch’s work status by LED indicators. The following table shows
these indicators function:
LED Status Description
PWR
ON
Power is supplied
OFF No power
Link
ON
A valid link is established
Blinking Data packets received
OFF No link is established
PoE
ON
There is a PoE PD (Powered Device) connected to the
port, which supply power successfully.
OFF
No PD port connect to the port, or the power is not
enough to supply PoE device to work
MAX 1(1-4
Ports)
ON
When the power output to PDs has reached or
exceeded the maximum power. No additional PDs
connected will be powered.
OFF
When the system is using less than 55W or Higher than
70W
MAX 2(5-8
Ports)
ON
When the power output to PDs has reached or
exceeded the maximum power. No additional PDs
connected will be powered.
OFF
When the system is using less than 55W or Higher than
70W