Specifications

4 | ENGLISH
2.2 Rear panel
Figure 1-2 shows the rear panel of the switch.
Power :
The power port is where you need to connect the power cord.
3.0 Rack-mount Installation
The switch is rack-mountable and can be installed on a 19 inch equipment rack. To do
this, first, please install the mounting brackets on the switch’s side panels (one on
each side), secure them with the included screws, and then use the screws provided
with the equipment rack to mount the switch on the 19 inch rack.
4.0 Connect Powered Device to the Switch
All ports of the switch have PoE power supply function. The maximum output power of
each port can reach up to 30W. The total maximum power is 140W; 70W for port 1~4
and 70W for ports 5~8. It can make PD devices, such as internet phone, network
camera, and wireless access point work. The switch provides five levels of 3.84 ~
25.5W electric power request. You only need to connect the switch PoE port directly to
the PD port by network cable.