Operation Manual

4 | ENGLISH
2.2 Rear panel
Figure 1-2 shows the rear panel of the switch.
Ports :
These ports are connection points for PCs and other network devices, such as
additional switches. PoE function only on port 1~8.
Power :
The power port is where you need to connect the power supply.
3.0 Connect Powered Device to the Switch
All ports of the switch have PoE power supply function. The maximum output power of
each port can reach up to 15.4W. The total maximum power is 60W. It can make PD
devices, such as internet phone, network camera, and wireless access point work.
You only need to connect the switch PoE port directly to the PD port by network cable.
4.0 Switch Features and Specifications
Features:
 8 port PoE function (port1-port8) and 16 port 10/100Mbps Auto-negotiation Fast
Ethernet RJ45 ports (port1-port16)
 Compliant with 802.3af specification
 Supports PoE power up to 15.4W for each PoE port
 Supports total PoE power up to 60W for all PoE ports
 Supports PoE IEEE802.3af compliant Powered Device (PD)
 Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for
Half-duplex Mode
 8K entry MAC address table of the switch with auto-learning and auto-aging
 LED indicators for monitoring power, link, activity, POE
 External power supply
Specifications: