Specifications

4 | ENGLISH
MAX2,
port
5~8
On
When the power to Powered Devices has reached
the maximum power (The power of all the connected
PoE ports is ≥55W). No power may be supplied if
additional PDs are connected.
Blinking
When the power output to Powered Devices has
exceeded the maximum power (The total power of
all the connected PoE ports is ≥70W).
Off
The power of all the connected PoE ports is <55W,
or no Powered Devices are connected to the
corresponding port.
2.2 Rear panel
Figure 1-2 shows the rear panel of the switch.
Power :
The power port is where you need to connect the power cord.
3.0 Rack-mount Installation
The switch is rack-mountable and can be installed on an 19 inch equipment rack. To
do this, first, please install the mounting brackets on the switch’s side panels(one on
each side), secure them with the included screws, and then use the screws provided
with the equipment rack to mount the switch on the 19 inch rack.