Operation Manual

15 | ENGLISH
5.0 Configuring the router as a signal booster
(WDS)
Do you already have a wireless network and do you like to increase the range of the
wireless signal? Then connect the router as a signal booster. In order to realize this,
several settings of your signal booster (2) and of your wireless router / access point (1)
must be modified. In the example below we use 2 pieces EM4505.
Note: WDS is not a standard protocol and may not work between different brands and
models. If you are facing problems please refer to the chapter “Configure the router as
a signal booster (Wireless Multi Bridge).
A 2
nd
EM4505 as signal repeater
(1)
(2)