Install guide

14 | ENGLISH
7. Click ‘Properties’.
8. Select ‘Use the following IP Address’.
9. Enter ‘192.168.8.25’ in the ‘IP Address’ field.
10. Enter ‘255.255.255.0’ in the ‘Subnet mask’ field.
11. Click ‘OK’.
12. Enter ‘http://192.168.8.200’ in the address bar to log in to the router.
5.0 Configuring the router as a signal booster
(WDS)
Do you already have a wireless network and do you like to increase the range of the
wireless signal? Then connect the router as a signal booster. In order to realize this,
several settings of your signal booster (2) and of your wireless router / access point (1)
must be modified. In the example below we use 2 pieces EM4510.
Note: WDS is not a standard protocol and may not work between different brands and
models. If you are facing problems please refer to the chapter “Configure the router as
a signal booster (Wireless Multi Bridge).
A 2
nd
EM4510 as signal repeater
(1)
(2)