Install guide

8 | ENGLISH
2.4.2 WEP security
If you would like to use WEP security, please follow the security steps in chapter 2.4.1,
and select ‘WEP’ at step 17 .
Select ‘Use a 128 bit key’ and click ‘Next’. Fill out a password in the field ‘Network
Key’. For this WEP key you are only allowed to use numbers from 0 till 9 and the
letters a till f. Do not use any punctuation marks and make sure the password is
exactly 26 characters long.
2.5 Finishing the installation procedure of your wireless
router
After following chapter 2, you can finish the installation procedure by following the next
steps:
1. Remove the UTP network cable from your computer.
2. Remove the UTP networking cable from the LAN port of your router.
3. Restart your computer.
4. Congratulations! You have properly installed the router.
An explanation how to connect your wireless network using Windows XP, Windows
Vista, Windows 7 and Windows 8 can be found in chapter 7.
* The connection is lost when WPA2 AES or WEP has been enabled in the router and
not yet in the wireless network adapter. When WEP/WPA2 AES has also been
enabled in the wireless network adapter, the connection will be repaired.
Write down the security method, the network name and the key:
WPA2 AES WEP
Network name: _____________________________________________________
Key: _____________________________________________________
3.0 Setting up a secured connection using
WPS
The EM4544 can be secured using WPS. WPS is a handy feature, which allows you
to secure your wireless network by pressing the WPS button on both your Eminent
router and your wireless WPS adapter. The Eminent router and your wireless WPS
device will then automatically ‘agree’ to use a SSID and WPA2 AES security key. The
connection between the Eminent wireless router and your WPS device will be
established automatically.
Make sure the wireless WPS adapter is installed on your computer.